Best Brushcutters For Garden

The Best Brushcutters For Garden – Buying Guide, Reviews And Analysis In 2020

To keep our garden free of weeds and weeds, a brushcutter is an effective tool, since it allows us to eliminate all unwanted plants and even small shrubs, depending on the engine power. If you plan to purchase one of these devices, we recommend taking into account some features, such as engine power, that is high enough to allow you a variety of tasks and cuts.

Depending on the type of weed you need to cut, you may need a metal disc or wire equipment; Also important are the weight of the equipment and the dimensions, which allow you to handle it with ease. Among the most prominent models of the best brush cutters for the garden are the Bosch AFS 23-37 brushcutter, which has a power of 1,000 watts, has a double clearing system using thread or cutting blade and is light, in addition to being very manageable. Another notable team is the Elem Garden Technic DCBE1001, with a powerful electric motor with batteries with 1000 watts of power, it also has a dual system of leaf and wire heads, all with a lightweight of just 6 kg.

Comparison chart of the best brush cutters for garden

Bosch AFS 23-37 – Brushcutter 

  • The equipment has a lightweight design, barely 5.3 kilos in weight, which, along with its double handle system and an adjustable strap for the shoulder, which makes it much easier to cut for long hours without difficulty or discomfort.
  • The durability of the included cutting cable, when this system is used, is somewhat deficient in some cases. So it is appropriate to adopt the measure and type of cable to the type of vegetation that we are cutting.
  • Powerful and manageable equipment, with 1000 watts of motor and a double cutting system to be more effective in eliminating weeds.

Elem Garden Technic DCBE1001 – Electric brushcutter (1000 W)

  • Thanks to its 1000W electric motor and its dual system capable of using a saw blade with a 25.5 cm range of cut, this product help you cut more efficiently and pleasantly without problems.
  • Due to its system of power supply by batteries, it is not recommended to use the product to clear large lands since it surely does not reach the corresponding autonomy.
  • This electric brushcutter, high power, and performance, allows eliminating all weeds without problems or complications.

Avalon Xtreme Pro GB508-A 2.64 HP petrol brushcutter

  • The model has a cutting system with a powerful 2.64 horsepower petrol engine, powered by a Bosch spark plug, which makes it easier for you to remove any plant residue without complications or discomfort.
  • In order for the equipment to maintain its performance, it is necessary to provide a good mixture of water and oil inside the tank, which prevents the product from deteriorating during use.
  • A light and silent model, which makes it easier to eliminate weeds without problems or complications.

Which is the best brushcutter in the market?

When cleaning the garden of weeds, bushes and other elements (or even removing light bushes, depending on power) a brushcutter is an excellent tool, light and easy to use. With our guide to buy the best brush cutter, you will know everything you need to make your purchase a success. This is what you should notice.


The difference between your purchase being an investment or a simple waste is knowing the best options you can buy. So do not go ahead and review this guide with the best brush cutters and their characteristics.

Recommended Products

Bosch AFS 23-37

Main Advantage:

In addition to having an operating power of 1000 watts, the adjustable strap, and handle system, next to the back harness, make it more comfortable to work with this brushcutter.

Main Disadvantage:

According to some users, the product’s power cable is somewhat short, so to have greater autonomy, you probably need an extension or similar.

Verdict: 9.8 / 10

The brushcutter Bosch AFS 23-37 is a powerful product, with an engine equivalent to 1.3 horses and that makes it easier to eliminate weeds and weeds from the garden, both using its cutting blade and the thread with which it is compatible.

Main Features Explained

Food and autonomy

The brushcutter Bosch AFS 23-37 is a model that deserves a prominent place in any comparison of brush cutters for its power and feeding system. We are talking about an electric model that incorporates a motor of 1000 watts of power, equivalent to 1.3 horses, approximately. Enough strength to perform all kinds of light cutting jobs and without too many complications.

Although it is true that the model works plugged into the network, the position of the connector and the possibility of using extensions to reach where it is necessary make it easier to use the brushcutter. A plugged system that reduces part of the total weight of the equipment, by dispensing with the extra weight of the batteries and the power system, giving you greater convenience of use.

Comfort of use

Following the line proposed by electric brush cutters, this model has a lightweight design and an adjusted weight of about 5.3 kilos. This helps to move the tool comfortably without having to make too much effort throughout the process. But so that you feel even less weight when working, the product is accompanied by tape and a harness with which to hang the machine on your back, to better distribute the weight and give you greater comfort.

To increase this comfort, this product incorporates a double grip system as the best brush cutters on the market . This system consists of a double handle, with a conventional holding bar and a second handle to move it properly when cutting. This helps you reduce fatigue, even during prolonged use sessions.

Thread and blade system

So that you can cut more effectively, this model has a dual cutting system with which to choose the most appropriate way to work. This system allows having a three-element cutting blade with a good sharpening, or the current cutting thread system, which is properly stored inside the piece for greater resistance.

As an additional advantage, the model allows you to change the way you work easily, without the need for tools to move from one system to another. Something that also saves you time and hassle when it comes to replacing damaged threads or replacing them with others depending on the materials you work on, making your work time more effective.

Elem Garden Technic DCBE1001

 Keeping your garden in perfect condition is a task that can be tedious and complicated or simple and enjoyable. It all depends on the tools you use to work on it. As an example of a tool that will simplify your work, we find the Elem Garden Technic DCBE1001 brushcutter.

This tool has an electric motor of 1000 watts of power that helps you eliminate any remaining brush or weeds that pretend to invade your garden.

For cutting it has a dual system in which you can mount a traditional three-blade saw or opt for modern cutting threads in plastic material.

The electric motor also allows you to avoid traditional problems with fumes and combustion of gasoline products. All this in a light product, easy to use and that you can save when you finish without barely taking up space in your garage.


Electric system:

This model works with batteries which avoids inconveniences such as the fumes of the combustion of gasoline, the dangers of recharging it or having to succeed with the mixture of oil and gasoline.


The battery system is much lighter than the explosion engine so that the product is extremely light, just 6 kilos, to work more comfortably.

Mixed system:

The design of the operating head allows working with both modern cutting threads and traditional cutting blades, depending on the work to be developed.

Ergonomic handle:

The ergonomically designed handle reduces vibrations and makes your work more comfortable and pleasant.



Due to its characteristics, the machine may fall short if you have to work in large areas, is recommended for small and medium-sized plots.

Avalon Xtreme Pro GB508

 Caring for your garden is an entertaining task as long as you have the right tools. Tools that go beyond the mere lawnmower and among which is the brushcutter.

This tool allows you to be able to eliminate the remains of larger size, of brushwoods and herbs, as a previous step to finish off with the mower.

To make the task easier and more convenient, you should opt for tools such as the Avalon Xtreme Pro GB508 petrol brush cutter, which with its 2.64 horsepower will take care of leaving your garden free of weeds.

Light and high-quality product with which you will obtain excellent results thanks to its double handle system and its cutting with plastic thread. A good quality tool with which to keep your garden in perfect condition with hardly any effort.


High power:

The 2.64 horsepower petrol engine generates a high turning capacity that eliminates any remaining grass and small bushes.

Bosch spark plug:

The start-up and explosion system is based on a spark plug from Bosch, as a sign of the high quality of this product.

Double handle:

Compared to other products, the Xtreme model has a double handle for a more comfortable use. It also includes a harness to hold it on the back.

Professional Design:

Both the design of the product and its components are considered professional design, which is a guarantee for a long service life and with maximum efficiency.

Euro 2 Standard:

The engine complies with the Euro 2 standard, which guarantees greater respect for the environment and a cleaner working environment.



Although the problem is typical of gasoline engines, it is necessary to add oil to the fuel to avoid damage to the machine.

Einhell GH-BC 43 AS

 One of the best brush cutters according to its quality/price ratio is the Einhell GH-BC 43 AS . Despite its weight of 9Kg, it has a separation mechanism on the shaft to make it easier to move and store. This brush cutter is made of aluminum, which makes it very resistant.

It comes in two attractive colors; black and red Like other models, it has a multifunctional control with all the necessary controls to perform a perfect job.

As for extension, it is a little more limited than other brush cutters, with 97 cm. However it is a powerful and reliable tool; Its harness makes it easy to load, and its anti-vibration mode promises optimal performance with the least discomfort.

When looking for the best brand of brush cutters we find Einhell, so we invite you to review the advantages and disadvantages of your GH-BC 43 AS model so that you also include it in your selection process.



It has a two-stroke petrol engine, ideal to offer greater performance when using this machine, which is also one of the cheapest on the market.

Easy transport:

It allows it to be transported more easily than other similar models since it has a dividing axis that detaches and allows better storage.


The handle can be used comfortably, due to its design similar to that of a bicycle, so you can use the device with ease.


The blade is formed by three sharp blades that allow the cut to be made more precisely and in less time.



It does not include a wide range of accessories, although this does not limit its proper functioning.

Parker PGMT-5200

 The Parker PGMT-5200 brushcutter is positioned as one of the best in its category for a whole series of properties that make it very complete and efficient.

This device has a safety equipment that includes protective glasses, gloves, safety clothing, and toolkit. It also incorporates an extensible rod to achieve greater reach.

With the telescopic arm it gets almost 4 m away. It has an electrical power of 2.2 kW and a considerable 7,500 rpm. It adds a power of 3.4 horsepower. All this makes it an excellent option to use at home or do more complete jobs.

The biggest against this device is its weight of about 16 kg, which is a lot of weight to have to carry for a long time. Another of its disadvantages is the price, being among the most expensive.

Parker PGMT-5200 has been recommended as the best brushcutter for 200 euros, and that’s why we show you its pros and cons.



It works with a 52CC two-stroke petrol engine, which is robust and offers a good level of performance, in order to generate enough power for the proper performance of the device.


It has a number of functions, since in addition to serving as a brushcutter, it works as a chainsaw, lawnmower, hedge trimmer, etc., so you won’t have to buy other machines.


It includes the corresponding accessories for each function as well as a safety harness and protective clothing that are very useful when handling the device.


Its power level is 3.4 horses, so that its performance is high, and provides effective results in a short time.

Simple use:

It is simple to use, with a universal mechanism that you will easily understand.


Husqvarna 952 71 57-52

 This brushcutter from Husqvarna has features that place it as one of the most modern and best performing that you can acquire if your work is at home. It is primarily designed to provide comfort; With only 5 kg it is very light and will allow you to manipulate it with ease. This brushcutter comes with a standard double harness commonly used in light equipment. It reaches high speeds (8,000rpm), but at a lower power.

One of the advances that Husqvarna 952 71 57-52 brings is its Smart Startel that provides a soft start with a minimum of effort compared to other brands.

Another very interesting novelty is that this equipment is designed to generate a very low emission of gases, without compromising its power, thanks to its E-TECH II system. Its grass pinion is designed for better cutting performance at ground level.

In case you have not yet chosen the right product, we present the pros and cons of the Husqvarna 952 71 57-52.



It includes its respective harness that will give you a good degree of support and will allow you to have a good range of motion when handling this machine.


The engine has the appropriate power level so that the start is fast and you can start using the device immediately.


It is a quite light brushcutter, whose weight is 5 kg, so you will not get tired quickly when using it.


The handle is ergonomic and allows you to move easily to achieve a precise cut in a short time, likewise, the design makes the blade parallel to the ground and this helps to make a more efficient cut.



Fuel tank capacity may be insufficient in some cases, although if you have fuel on hand this will not be a problem.

Elem Garden Technic DCBE1001

Main advantage

The most novel thing that this brushcutter has is that it will not cause discomfort caused by products that work with gasoline and pollute the environment, because it works with an electrical system.

Main disadvantage

Although it is a powerful product, its use is recommended for medium or small areas, as it could become a device that does not cover the needs in much wider areas.

Verdict: 9.2 / 10

This is a brush cutter that in addition to helping you maintain gardens and common areas much cleaner and free of herbs, will help you maintain the environment as it does not pollute at all.

Main Features Explained

Weight and measurements

The Elem Garden Technic DCBE1001 article, compared to other brush cutters, is a lighter model and therefore easier to handle, has just six kilograms in weight, so you can be comfortable while doing cleaning work in your garden, in addition Thanks to its dimensions of 97.4 x 22.4 x 11.4 centimeters, it is a product that you can manipulate with total simplicity.

The length of cut that this brushcutter allows is 25.5 centimeters, thanks to the fact that it has a three-tooth blade.

Electrical and mixed system

Brushcutters that work with gasoline systems are machines that, in addition to presenting certain inconveniences once the fuel is used up, usually contaminate the environment excessively; This product, on the other hand, does not cause contamination since it has a completely electric system, so you should not worry about filling the brushcutter tank every time the fuel runs out.

On the other hand, this device includes a mixed system, and this refers to the head of the device since it allows you to work with both traditional cutting blades, and with those modern cutting threads, depending on the type of cut and work you are going to carry out with the brushcutter, thus providing a completely versatile device.

Use and cut

When choosing a brushcutter it is important that it has a soft grip, feeling comfortable when using the product while cleaning the garden.

The brushcutter of Elem Garden, besides being light, has a fully ergonomic grip system and is also able to reduce the vibrations produced by the equipment, allowing you to work in a quiet and comfortable way.

The cut made by this device is effective, because its cutting capacity with coil is about 40 centimeters, covering a large cutting area, while the cutting capacity with blade is about 25.5 centimeters, in addition to the coil It has 2 wires, 1.6 millimeters in diameter and 4.5 meters in length, respectively.

How to use a brushcutter

Although we have a small garden, we must always have the necessary tools to perform regular maintenance and cleaning. It is then when the brush cutters are necessary, a tool of simple use that facilitate the task of eliminating the weeds and weeds that invade the land where we grow the plants that we want to enjoy.

Choose the power of the brushcutter 

This useful tool is used to clean gardens and grounds, but it must be remembered that these areas grow different types of herbs, weeds, and shrubs, and each of them requires different powers to properly eliminate them. It is not the same to cut grass than bushes, that is why it is so important that the brushcutter has an engine with power adequate to your need.

The basic power of the motors in this tool is 750 watts, which is fine if you are going to eliminate small weeds and weeds. If this is not your case and you should cut medium-sized weeds onwards and even bushes, you will need more power. When it comes to this type of tool, the idea is to opt for a motor with more power than is considered necessary.

Use metal blades or cutting wires 

Brushcutters perform their function of cutting weeds using either metal blades or threads in plastic material. Both options are equally efficient in terms of the elimination of herbs, but the threads, being more flexible, manage to reach the corners more easily than the blades. However, the blades offer the advantage that they quickly cut the bushes.

Take the necessary precautions during use 

This tool is designed for cutting, so heavy-duty footwear should be used to avoid any accident, since the blades or threads will always be close to the feet.

Gloves with anti-slip surfaces should also be used to have a better grip of the brushcutter when handling, thus preventing control loss during movements.

Protective goggles must be used as part of the clothing during work, as stones or other objects shot at high speeds always come out when struck by blades or threads, which can cause damage to who is using the tool.

Another precaution that must be taken is that if there are people near where the cleaning is being carried out, they should be kept at least 15 meters away. You should also stay away from pets. Finally, the machine must be turned off if it is going to move from one place to another.

How to clean 

As said before, this tool is easy to use. To clean the herbs, you must adjust the body with the harnesses and straps you bring; Do not leave any loose. Put on the recommended safety clothing. Turn on the machine and direct the cutting discs to the lowest part of the weeds and weeds that you want to remove to cut them at the root.

The most popular brands

As a fundamental assistant for gardening, it is necessary to have a brushcutter that facilitates this work as professionals. Therefore, we have made a comparison of models and their characteristics taking into account the opinions of many people on the Internet. Now we are going to briefly analyze some of the most important brands such as Husqvarna, Alpina and Eiinhell.

Husqvarna Group was founded in 1959 in Sweden and began with the manufacture of muskets in the town of Huskvarna. At that time the company established the technological bases that allowed the development of quality products in the world such as hunting weapons, bicycles, motorcycles, appliances, sewing machines, and outdoor products.

This brand leads the world in the manufacture and commercialization of machinery for forestry, agricultural and gardening work, as well as for construction, rescue, cleaning, personal protective equipment, clothing, and accessories. Among them: chainsaw mowers, hedge trimmers, brush cutters, blowers, vareadores and chokers.

For the care of the environment, Husqvarna has developed a holistic approach in terms of production methods, packaging, noise, materials, energy consumption, emissions and recycling, using sustainable and replaceable materials. Recently introduced the use of electric motors in those tools for external use such as brush cutters.

The electric brush cutters manufactured by this brand have a brushless motor or steel blade, double rotation, with lithium battery and charger. They are ergonomic, lightweight, with a handlebar that makes it easy to handle and allows work to be carried out safely and efficiently.

Global Garden Products, is a leading company in the industry of manufacturing lawn mowers and motorized garden equipment. With over 90 years of experience, it has branches throughout Europe. It offers its own manufacturing equipment through its 5 major brands such as: Stiga, Alpina, Mountfield, Atco, Castelgarden,

Alpina as the Italian brand of the emporium GGP, was founded in 1960. Since then, it has been a pioneer for more than 50 years in the manufacture of garden equipment. It has a range of high-quality products and friendly prices. This company combines ease of use of its equipment with aesthetics and design for the achievement of better results and personal satisfaction in the performance of home gardening.

In 1968 Alpina began manufacturing chainsaws and, by 1980, began manufacturing new products such as brush cutters. Recently, it has launched the incorporation of a high-performance lithium battery to several of its equipment such as lawnmowers, chainsaws and brush cutters.

Alpina produces electric brush cutters with engines ranging from 350, 600 to 1000 horsepower and uses materials such as aluminum, plastic, stainless steel and rubber, which on a long and ergonomic handle, make their use comfortable, reduce the vibration and provide an easy grip and safety to the user.

Einhell Germany AG is a company founded by Hans Einhell in 1964 in Landau / Isar (Germany). It is dedicated to the development and marketing of solutions for those users who do DIY work and other semi-professions.

The success of this brand comes with the production of distribution boxes for construction sites, transformers for welding equipment, cables, and small battery chargers. This brand opens to the international market with a range of products for the home, the garden and the expansion of numerous innovative management processes, through subsidiaries and partners in Europe, Asia, Oceania, the Middle East, Africa, and South America.

Currently, Einhell has become a reference symbol in terms of its unique and distinctive form of production design for heating equipment, gardening, car accessories and power tools, such as screwdrivers, bridge cables, lawnmowers, and brush cutters, among others.

Einhell brush cutters have a 180 ° universal motor, some have an interchangeable lithium battery. They are characterized by being long-handled, easy to handle, with a casing and auxiliary handle made of high-impact impact-resistant plastic. They allow to reach areas of difficult access by making clean cuts thanks to its double thread, making it possible to pass through the densest weeds.

Frequently asked questions

Q1: Why doesn’t the brushcutter start?

The fact that a brushcutter does not start may have different reasons, depending on whether it is an electric or a gasoline model. Starting with the electric ones, simpler, if the product does not start it may be because the cables are not properly connected to the network or to the equipment. If the model is a battery, it is advisable to check the correct placement of the battery, as well as verify that the battery is properly charged. In minor cases, there may be problems with the contact, although this already requires specialized technical assistance.

Regarding the gasoline models, the starting system is usually more complex, which can generate more inconveniences when starting the product. Among the usual causes we have the rope either because we are not performing all the force that we should on it or because the rope is not well connected and does not transmit the rope to the start. On the other hand, the product may not have enough gasoline to start, so we should prime the engine for a little more start-up, but without going over. And finally, the brushcutter may be choked by excess fuel, which we should clean from the spark plug area to obtain an adequate mixture of oxygen and gasoline.

Q2: Why is the brushcutter drowning?

In petrol brush cutters, as in any engine, a mixture of gasoline and air is used that is burned in order to generate the precise energy for the cutting wire to move. If the combustion mixture has more gasoline than it should, since it does not have the necessary air for it, the engine is not able to start or run, which literally causes it to drown.

To solve this problem it is necessary to remove excess gasoline in the engine, disassembling the spark plug and being careful with the fuel that may escape during the process. Next, you need to take a look at the feed system in case you may be adding more fuel than necessary through the feeder. Anyway, since each machine has its particularities, the manual usually indicates the procedure both to access the spark plug area and to recover the equipment in case of drowning.

Q3: Which one is better, the electric brush cutter or petrol?

When assessing the purchase of a brushcutter, as with other power tools, there is always a doubt about betting on an electric or gasoline model. And in truth, the only element we should consider are our own preferences, as well as the work we are going to do.

In this case, petrol brush cutters have the advantage that they are autonomous tools that do not need a nearby plug or a charged battery to operate. If the deposit is finished it is simply recharged and ready. In addition, they are products with more power than other electric models. However, in this section, there is a bit of everything to choose from.

Regarding the electric models, they are the most suitable for jobs that are not too complex and for those who do not want to worry about fumes, odors and the inconvenience of the gasoline charge and its effects. As negative aspects, we would have its autonomy that is limited to where there is a plug nearby or the capacity of its battery, as appropriate.

Q4: How to change the thread of a brushcutter?

More and more brushcutters are working with a thread of plastic material that is responsible for cutting the different plant remains that we have to work. A thread that deteriorates with the use and that we must change frequently according to the zone in which we are working and the intensity of its vegetation.

In more and more models we find a system that includes a spool of thread that is releasing the same as we indicated, making the process much easier. In this case, what we should change is the reel when necessary. A process in which we must cancel the starter of the brushcutter, either by removing the battery or the plug or removing the gasoline from the tank, in order to avoid accidents. Next, it will be necessary to open the area where the reel is located for what we need from a screwdriver or a similar tool.

When we have this area open, we will have to remove the old reel and assemble the new one, verifying that the connections are made correctly, since many reels must be mounted with a certain “polarity” or orientation. Do not worry if there is a lot of thread, because you can always cut it if necessary. To finish the process, once the reel is properly secured, it is time to close the area where you are to start working. Do not forget to leave everything as it was mounted to avoid problems.

Q5: How to turn on the brushcutter?

Depending on the type of brush cutter we are using, the product ignition process varies. In general, we have a system designed for gasoline models and another for electric models.

In gasoline models, this process begins by loading and priming the fuel engine. For this, the machine has an element that serves this purpose and we must press several times so that the gasoline reaches the ignition zone. The next step would be to place the switch in said ignition position so that the spark plug ignites it. And the last step is to “pull” the rope normally included in gasoline models. In this case, it is recommended to pull slowly until we notice more resistance and then give the strong pull that activates the ignition.

If we have an electric model, this whole procedure will be much simpler. We will start by plugging the brushcutter or mounting the battery if we have not done so yet. Next, we must properly hold the product and press the power switch. At the moment we will see that the brushcutter starts working and in a few seconds it will be ready to give us the performance we need.

Q6: How to start a cordless brushcutter?

Since the rope is essential to give the gasoline engine the necessary force to start if the brushcutter rope breaks it will not be possible to start it. Therefore, we will need to change the current rope or rope for a new one. As an alternative, depending on how much rope we have left, we can make a small gear with a conventional rope as long as the measurement becomes the same and we can connect it with the existing one. A task in which it is convenient to disassemble the area from which the rope comes out and verify how much material is left. Anyway, if you get it, it is a remedy to get out of the way since the solution is the change of the rope.

In this process, the change for a new rope, we must disassemble the support and access the area of the bolt where it is supported to determine the assembly system of the same. All this without forgetting the need for the new rope to have the corresponding measures for our machine. In both cases, it never hurts to take a look at the machine’s operating instructions to avoid breaking something else during it.

Shopping guide

Engine power

When you go to buy a good and economical brushcutter, it is necessary that you take into account the use that you will give it. Mainly because depending on that use it is necessary to choose a motor of greater or lesser power. If you plan to use it to trim weeds and a light brush, a simple motor is enough, while the thicker the material to be cut and the more abundant its presence, it will be necessary to increase the engine power level, in addition to changing the piece obviously cut.

As we always recommend with all the tools, it is preferable to choose a model that exceeds the needs we may have, if the price difference is not high, to fall short with a team that may not do everything we need. And although there are both gasoline and electric models, it is true that, unless you have little work to do, the gasoline model is generally more interesting than the electric equivalent.

Cutters and assembly

The brushcutter makes the cut by turning at high speed of a cutting element, which can be a traditional cutting disc made of a metallic material, to a thread that is also placed in the cutting area and that adapts to the different configurations of grass and brush you can face. In this case, it is essential to verify the universal character of the machine, in terms of its measurements, so that you do not have problems when assembling any type of thread or cutting disc so that the machine is much more versatile.

At this point, it is also important that the assembly of said cutting elements is simple and, if preferable, that it can be done without the need for tools, although always guaranteeing an adequate clamping of the thread or disk, which maintains the necessary cutting power.


Compared to other tools, the brushcutter is self-supporting equipment that carries the operator directly on its connected body through a harness system that allows maintaining adequate mobility and comfort. That is why it is essential that, when organizing your brushcutter comparison, you check that the fastening system is adequate and comfortable. In this section, it is also important that you verify that the weight is as light as possible, although obviously adapted to the characteristics of the device and that this allows adequate utility.

Elements such as the length of the cutting arm, the handlebar or the existence of a double handlebar or even the existence of a second harness for the heavier machines are essential elements to ensure that the operation of the machine is adequate and that you find it comfortable to use.

Which is the best brushcutter of 2020?

Leave a Comment